Castrol MOLY GREASE 400g 15048A Castrol-1645/7318
Castrol MOLY GREASE - 400g Castrol-1645/7318
High melting
point, lithium-based grease containing molybdenum, providing dry lubrication
under extreme operating conditions.
Ideally suited
for King pins and bushes, shackles and suspension trunnions, bevel worm and peg
steering boxes.
Castrol Moly
Grease Multipurpose Grease with Molybdenum Disulphide
Description
Castrol Moly
Grease is a multipurpose grease, fortified with solid lubricant and developed
for both Automotive and Industrial applications. It is based on an optimised
balance of mineral base oil, lithium thickener technology and a specially
selected additive system incorporating EP/anti-wear chemistry, antioxidants and
corrosion inhibitors. The inclusion of molybdenum disulphide enhances load
carrying performance whilst reducing friction, especially in those
components where
reciprocating or sliding motion is prevalent.
This grease is
rated : NLGI grade 2
These NLGI grades
are then used to express the level of consistency each grease has.
NLGI grade 000
grease is completely fluid
NLGI grade 0
grease is described as very soft
NLGI 1 grease is
soft
NLGI 2 grease is
considered normal
NLGI 3 grease is
firm
NLGI 6 grease is
defined as very hard.
Application
Castrol Moly
Grease is suitable for use in a wide range of slow to medium speed bearings
where shock loads or excessive vibration is likely and there is a specific
requirement for the use of a grease fortified with molybdenum disulphide.
The inclusion of
solid lubricant with its friction reducing capability makes Castrol Moly Grease
particularly suitable for applications involving reciprocation and/or sliding
motion where the prevention of scuffing and fretting is desirable.
The multipurpose
nature of Castrol Moly Grease enables its use on both passenger car and
commercial vehicle components including flexible joints pivot pins, cams, screw
threads, splined shafts, slides and fifth wheels.
Advantages
Excellent
mechanical stability ensure the structural integrity of the grease is
maintained, thereby extending relubrication intervals. Good extreme pressure
and anti-wear properties provide extended protection in loaded applications
resulting in longer component life.
The presence of
molybdenum disulphide offers the benefit of reduced friction and resistance to
shock loads. Enhanced component protection under boundary lubrication
conditions.
Good water
resistance and corrosion protection afford longer surface protection in
applications with the potential for a degree of water contamination.
Multipurpose
capability increases the potential for reduced product inventories.
