CASTROL CLASSIC Grease - SPHEEROL Extreme Pressure Grease SX2 400g Castrol-9098/7318

Castrol SPHEEROL Extreme Pressure Grease SX2 400g Castrol-9098/7318

A calcium based extreme pressure grease, developed specifically to provide a high degree of resistance to "water wash" and to provide protection in wet environments.

Suitable for use on wire wheel splines, exposed brake shoe pivots, handbrake mechanisms and gear linkages. 

This grease is rated : NLGI grade 2

These NLGI grades are then used to express the level of consistency each grease has.

So, for instance:

NLGI grade 000 grease is completely fluid

NLGI grade 0 grease is described as very soft

NLGI 1 grease is soft

NLGI 2 grease is considered normal

NLGI 3 grease is firm

NLGI 6 grease is defined as very hard.

Castrol Spheerol™ EPL is a range of greases which comprises lithium based products, containing highly refined mineral oils, fortified with extreme pressure (EP) additives as well as corrosion and oxidation inhibitors.

These greases have been formulated with additives that provide good film strength under medium to high loads.

Application

The Spheerol EPL range comprises general purpose greases designed for plant wide lubrication. These greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common.

The stiffer consistency afforded by an NLGI 2 makes this product particularly suitable for the lubrication of bearings that are vertically mounted, or components exposed to a high degree of vibration.

The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common. Advantages High mechanical stability – the grease keeps its consistency in service ensuring long lubricant life Good adhesion – continuous lubrication and reduced consumption as film stays between lubricated surfaces Good water resistance – the grease film remains on the surface even in the presence of water Resistant to copper and steel corrosion – helps prevent rust and oxidation on metal surfaces Excellent EP and anti-wear properties – protects equipment against extreme loading and helps minimise bearing component wear.

In order to minimise potential incompatibilities when converting to a new grease, all previous lubricant should be removed as much as possible prior to operation. During initial operation, relubrication intervals should be monitored closely to ensure all previous lubricant is purged.